Christmas decorating with DIY gold glitter trees

It’s slowly beginning  to look like Christmas around the house. Last year I bought a white Christmas tree and when I pulled it out over the weekend it was all yellow. A couple cans of white spray paint and 24 hours to dry it was back to normal.

While I waited for the big tree, I  gathered some supplies to make gold glittered tree’s for our mantel.

I was provided product by BEHR to write this post but the thoughts and opinions expressed are my own.


  1. Gold Glitter tree sticks ( Walmart under $4)
  2. Small wood blocks
  3. Wood glue
  4. Drill
  5. Behr Paint

goldtreesOnce you have all your supplies, start pulling the tree’s off the sticks.  The paper comes off fairly easy. Grab one of your wood blocks and start drilling a hole in the center. Your drill bit should be the same size as the metal tree stick ( ie: not big).

TIP >>>> do NOT drill all the way through the block.

treeholeOnce you have your holes drilled, fill them with wood glue and stick your tree inside. Set aside till fully dried. About 10-20 minutes.

woodtreesNow comes the fun part, PAINT!!!! I am using white paint .. you can pick any color you want. I always buy Behr Premium Plus Ultra.

painttree Using a small paint brush, I painted the entire wood block.  Be careful you don’t get any paint on the tree.  You can always use a little washi tape around the bottom to prevent any paint getting on the stem.

With the Ultra paint I only needed one coat ( high five) .


Every year I decorate the fireplace with little tree’s . Last year they were all shades of pink. This year it’s green and gold.

I like tradition + change.

alltressWhile the tree’s were in the drying process my mom and I made new stockings. I love mixing new and vintage together.


If I don’t get to any other decorating, at least the tree’s are up !!!!

Your email is never published or shared. Required fields are marked *



M o r e   i n f o